Battery Chargers

12V 1A Battery Charger. Fully Automatic diagnostic charger and maintainer. Suitable for all 12V batteries including lead-acid, sealed lead acid and gel-filled
Features:
# Reverse Polarity Protection
# Identifies and recovers deeply discharged batteries
# Short circuit protection
# Thermal protection
# Over-charge prevention
# Interchangeable connection leads
# LED status indicators
# Suitable for medium to longterm charging
# Charge battery whilst still connected to vehicle
# Includes interchangeable leads
(crocodile clamp and terminal type)

BikeTek chargers offer a simple and effective motorcycle battery charging solution.
Each charger is supplied with two connector leads, Crocodile and Terminal, which have a male connector. This
block simply plugs into the female block of the charger unit, offering quick and versatile connection.
Crocodile leads simply clip to the battery terminals and are suitable for worktop charging. Terminal leads can be
permanently connected to the battery terminals whilst fitted on the motorcycle eliminating the need for battery removal.
Spare leads are available separately to enable one charger to be used on multiple bikes.
Available in UK 3-pin and European 2-pin versions, the UK charger has a 6v/12v selector suitable for all models of motorcycle battery.

BikeTek chargers offer a simple and effective motorcycle battery charging solution.
Each charger is supplied with two connector leads, Crocodile and Terminal, which have a male connector block. This block simply plugs into the female block of the charger unit, offering quick and versatile connection.
Crocodile leads simply clip to the battery terminals and are suitable for worktop charging. Terminal leads can be
permanently connected to the battery terminals whilst fitted on the motorcycle eliminating the need for battery removal.
Spare leads are available separately to enable one charger to be used on multiple bikes.
Available in UK 3-pin and European 2-pin versions, the UK charger has a 6v/12v selector suitable for all models of motorcycle battery.

European 2 pin plug adaptor
(Converts UK 3 pin plug to Euro 2 pin)

Perfect for charge and maintenance of all types of lead acid battery such as sealed, fl ooded, maintenance free and GEL batteries without overcharging. Ideal for charging motorcycle, ATV, snowmobiles, car and caravan batteries. 4 stage fully automatic charging program;
Bulk Charge
Absorption charge
Float mode
Output: 12 volts 1.5 Amp
6 LED display
Water resistant
Light weight and compact size
Easy to use and self monitoring
Spark proof
Reverse polarity protection
Fire retardant housing
Each charger is supplied with a set of interchangeable crocodile leads and terminal leads.
Spare leads are available separately.

Perfect for charge and maintenance of all types of lead acid battery such as sealed, fl ooded, maintenance free and GEL batteries without overcharging. Ideal for charging motorcycle, ATV, snowmobiles, car and caravan batteries.
4 stage fully automatic charging program
Bulk Charge
Absorption charge
Float mode
Output: 12 volts 1.5 Amp
6 LED display
Water resistant
Light weight and compact size
Easy to use and self monitoring
Spark proof
Reverse polarity protection
Fire retardant housing
Each charger is supplied with a set of interchangeable crocodile leads and terminal leads.
Spare leads are available separately.

Each charger is supplied with a set of interchangeable crocodile leads and terminal leads.
Spare leads are available separately.

Each charger is supplied with a set of interchangeable crocodile leads and terminal leads.
Spare leads are available separately.

Ideal for emergency use in Motorcycles and small vehicles
Light weight, easier for storage
For 6V and 12V batteries
Length: 1.5M
Copper area: 6mm
Amps: 30 amp

12V 1A Battery Charger. Fully Automatic diagnostic charger and maintainer. Suitable for all 12V batteries including lead-acid, sealed lead acid and gel-filled
Features:
# Reverse Polarity Protection
# Identifies and recovers deeply discharged batteries
# Short circuit protection
# Thermal protection
# Over-charge prevention
# Interchangeable connection leads
# LED status indicators
# Suitable for medium to longterm charging
# Charge battery whilst still connected to vehicle
# Includes interchangeable leads
(crocodile clamp and terminal type)

12V 1A Battery Charger. Fully Automatic diagnostic charger and maintainer. Suitable for all 12V batteries including lead-acid, sealed lead acid and gel-filled
Features:
# Reverse Polarity Protection
# Identifies and recovers deeply discharged batteries
# Short circuit protection
# Thermal protection
# Over-charge prevention
# Interchangeable connection leads
# LED status indicators
# Suitable for medium to longterm charging
# Charge battery whilst still connected to vehicle
# Includes interchangeable leads
(crocodile clamp and terminal type)

The POWER X is an all-in-one 5 stage 12 volt diagnostic battery charger for the maintenance and recovery of 12 volt motorcycle batteries.
- Fast charge cycle
- Deep discharge recovery
- Long term battery maintenance
- Advanced switch mode technology
- Thermal protection
- Short circuit protection
- LED main socket indicator
- Reverse polarity protection
- Crocodile and terminal adaptors

12V 1A Battery Charger. Fully Automatic diagnostic charger and maintainer. Suitable for all 12V batteries including lead-acid, sealed lead acid and gel-filled

Features:
# Reverse Polarity Protection
# Identifies and recovers deeply discharged batteries
# Short circuit protection
# Thermal protection
# Over-charge prevention
# Interchangeable connection leads
# LED status indicators
# Suitable for medium to longterm charging
# Charge battery whilst still connected to vehicle
# Includes interchangeable leads
(crocodile clamp and terminal type)

BikeTek chargers offer a simple and effective motorcycle battery charging solution. Each charger is supplied with two connector leads,“Crocodile” and “Terminal”, which have a male connector block. This block simply plugs into the female block of the charger unit, offering quick and versatile connection. Crocodile leads simply clip to the battery terminals and are suitable for worktop charging. Terminal leads can be permanently connected to the battery terminals whilst fitted on the motorcycle eliminating the need for battery removal. Spare leads are available separately to enable one charger to be used on multiple bikes. Available in UK 3-pin and European 2-pin versions, the UK charger has a 6v/12v selector suitable for all models of motorcycle battery.

BikeTek chargers offer a simple and effective motorcycle battery charging solution. Each charger is supplied with two connector leads,“Crocodile” and “Terminal”, which have a male connector block. This block simply plugs into the female block of the charger unit, offering quick and versatile connection. Crocodile leads simply clip to the battery terminals and are suitable for worktop charging. Terminal leads can be permanently connected to the battery terminals whilst fitted on the motorcycle eliminating the need for battery removal. Spare leads are available separately to enable one charger to be used on multiple bikes. Available in UK 3-pin and European 2-pin versions, the UK charger has a 6v/12v selector suitable for all models of motorcycle battery.